








Optima T100 Heated Circulating Bath
0.00SAR
The Grant T100 series of general purpose heating circulating baths offer accurate temperate control for straightforward applications in the range of 0°C to 100°C.
Product Details
Specifications
Applications
- Clinical, Microbiology and Pathology labs – media tempering, thawing and incubating samples
- Teaching labs, higher education/universities – practical demonstration/experimentation, sample preparation
- Clinical, Microbiology and Pathology labs – media tempering, thawing and incubating samples
- Teaching labs, higher education/universities – practical demonstration/experimentation, sample preparation
About
The T100 heating circulator can be used in combination with any Grant stainless steel or with a T-CLAMP for independent use of virtually any vertical sided tank.
- Cooling/heating range 0°C to 100°C
- Cooling achievable with optional immersion cooler (see accessory options)
- Stability ±0.05ºC / Uniformity ±0.1ºC
- Tank options 5L to 38L. Custom options available upon request
- 3 programmable temperature pre-sets
- Low liquid protection and fixed over temperature cut-out
- Visual alarm – alerts you when your attention is required
- Clear, bright 4 digit LED display
The T100 heating circulator can be used in combination with any Grant stainless steel or with a T-CLAMP for independent use of virtually any vertical sided tank.
- Cooling/heating range 0°C to 100°C
- Cooling achievable with optional immersion cooler (see accessory options)
- Stability ±0.05ºC / Uniformity ±0.1ºC
- Tank options 5L to 38L. Custom options available upon request
- 3 programmable temperature pre-sets
- Low liquid protection and fixed over temperature cut-out
- Visual alarm – alerts you when your attention is required
- Clear, bright 4 digit LED display
Products in the range
- T100-ST5 - 5 L
- T100-ST12 - 12 L
- T100-ST18 - 18 L
- T100-ST26 - 26 L
- T100-ST38 - 38 L
- T100-ST5 - 5 L
- T100-ST12 - 12 L
- T100-ST18 - 18 L
- T100-ST26 - 26 L
- T100-ST38 - 38 L
water baths
- Dimensions (h x d x w)333 x 172 x 120mm
- Stability (DIN 12876) @70ºC0.05±ºC
- Uniformity (DIN 12876) @70ºC0.1±ºC
- Setting resolution0.1ºC
- Display4 digit LED
- Timer function–
- No. of temperature presets3
- Re-calibration points2
- Socket for external probe (TXPEP, TXSEP)-
- Communications interface-
- Programmable-
- Relays-
- Safety – over temperatureFixed
- Fluid level – float-
- Language options-
- Alarms (can be configured to switch a relay)-
- Heater power – 230V1290W
- Electrical power – 230V1400 (50-60Hz)
- Electrical power – 120V1500 (50-60Hz)
- Height above tank rim200mm
- Depth below tank rim135mm
- Maximum pressure (water)-
- Maximum flow (water)-
- Pump connector 6mm bore-
- Pump connector 9mm bore-
- Weight2.1kg